Lighting brings us light and warmth at home. In daily life, in addition to regular cleaning, but also correct maintenance, in order to maintain the bright lights.

Correct installation is the premise

Proper installation of lamps and lanterns is the prerequisite for prolonging the service life of lamps and lanterns. If it is not installed correctly, the lamp can easily break down, sometimes even explode, which is very dangerous. In the household, the installation of lamps and lanterns in toilet (decoration effect drawing) and kitchen (decoration effect drawing) should be particularly careful.

The lamp of toilet must be equipped with damp proof lampshade, otherwise it will greatly shorten the service life of lamp; the kitchen lamp should pay special attention to prevent lampblack, because the accumulation of oil dirt will affect the lighting degree of lamp; the lampshade with light color has better light transmittance, but it is easy to stick ash, and it should be diligent in wiping, so as not to affect the light penetration; and generally speaking, do not let the lamp of kitchen and bathroom be placed in the position easy to condense water vapor To prevent bursting.

Early replacement of aging lamp

The two ends of the lamp tube used for a long time will turn red or have black shadow. At this time, it should be replaced in time. The purpose is to prevent the ballast from burning out and other unsafe phenomena. Generally speaking, when purchasing lamps, the lamp bulb will indicate the effective time, and regular replacement of aging lamp bulb is very helpful to the overall lamp maintenance.

Cleaning method should be correct

After the lamp is used for a period of time, a thick layer of ash will be deposited on it, which will affect our vision, so regular cleaning cannot be avoided. In the process of cleaning, pay attention not to change the structure of the lamp, nor to replace the parts of the lamp casually. After cleaning and maintenance, the lamp shall be installed as it is, without missing or wrong parts.

Generally, the lamps shall be wiped with dry cloth, and attention shall be paid to prevent moisture intrusion. If the lamps are non-metallic, they can be wiped with wet cloth to avoid dust accumulation and hinder the lighting effect.

Frequent switching of the most damaged lamp

Do not switch the lamps frequently when they are in use, because at the moment of frequent startup, the current through the filament is greater than the current during normal operation, which makes the temperature of the filament rise rapidly and accelerate sublimation, thus greatly reducing its service life, so it is necessary to reduce the switch of the lamps as much as possible.

Lamps and lanterns as an important decoration of the family, whether they are easy to use or not is related to the quality of home life. But generally speaking, many people don't care about the maintenance of lamps. Even if the lamps break, they will think it's a quality problem. In fact, there is a certain law when the lamps are used or installed. If they are used according to the law, the service life of lamps is very long.